iDevices Wall Switch is compatible with both iOS and Android devices. For the best user experience, if you plan on using your device with both iOS and Android, it's recommended that Wall Switch be setup first with the iOS device. Once both setups are completed, any available firmware updates can be run from either the iOS OR the Android device.
Note: When using Wall Switch with both an iOS and Android device, the iOS device will be the administrator device for creating and managing schedules.
After completing initial setup, follow these steps to put Wall Switch into pairing mode for setup on the second device:
- On the Primary Switch press and hold the Pairing Setup button “6” for 3 seconds, and release when the LED rapidly flashes blue.
- Next Tap “2”, the LED will turn solid blue indicating Wall Switch is waiting for the mobile device to initiate and complete pair set up.